Alphabetical
Lists of Performed Tests

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Test Packages

Please click on a letter above to view the services that begin with that letter.

A

ASTM D 150 A-C Loss Characteristics, Permittivity, and Dielectric Constant	ASTM D 2191 Acetaldehyde Content of Vinyl Acetate	ASTM D 1612 Acetone in Methanol
ASTM D 2942 Acid Acceptance of Halogenated Organic Solvents	DuPont FPL-3 Acid Number	UOP 587 Acid Number and Naphthenic Acids by Coulometric Titration
UOP 565 Acid Number and Naphthenic Acids by Titration	ASTM D 465 Acid Number of Naval Stores Products	ASTM D 664 Acid Number of Petroleum Products, Potentiometric Titration
ASTM D 3339 Acid Number of Petroleum Products, Semi-Micro Color Indicator Titration	ASTM D 5770 Acid Number of Used Lubricating Oils by Semi-Quantitative Micro Determination	ASTM D 974.a Acid Number, Color-Indicator Titration (TAN)
ASTM D 848 Acid Wash Color of Industrial Aromatic Hydrocarbons	ASTM D 3242 Acidity in Aviation Turbine Fuel, Acid Number	ASTM D 2086 Acidity in Vinyl Acetate and Acetaldehyde
ASTM D 1613 Acidity in Volatile Solvents and Chemical Intermediates	ASTM D 847 Acidity of Benzene, Toluene, Xylene, Solvent Naphtha, and Industrial Aromatic Hydrocarbons	ASTM D 2989.a Acidity of Halogenated Organic Solvents
ASTM D 1093 Acidity of Hydrocarbon Liquids and their Distillation Residues	ASTM D 1067 Acidity or Alkalinity of Water	ASTM D 1662 Active Sulfur in Cutting Fluid
ASTM D 4951.a Additive Elements in Lubricating Oils by Inductively Coupled Plasma – Atomic Emission Spectrometry (ICP-AES)	ASTM D 5185 Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma – Atomic Emission Spectrometry (ICP-AES)	ASTM D 2510 Adhesion of Solid Film Lubricants
BB-F-1421 B.f Air and Other Non-condensables, Including Refrigerants	ASTM D 2119 Aldehydes in Styrene Monomer	ASTM D 1614 Alkalinity in Acetone
ASTM E 291 Alkalinity of Caustic Soda	ASTM D 2989.b Alkalinity of Halogenated Organic Solvents	Std M 2320 Alkalinity, Titrimetric, Phenolphthalein
ASTM D 4046 Alkyl Nitrate in Diesel Fuel by Spectrophotometry	ASTM D 5184 Aluminum and Silicon in Fuel by Ashing, Fusion and ICP-AES	ASTM D 2083.b Amine Purity by Gas Chromatography, (Rich and Lean)
ASTM D 2083.a Amines, Total, Primary, Secondary and Tertiary Fatty Amines	UOP 683 Ammonium Bisulfide	ASTM D 1839 Amyl Nitrate in Diesel Fuels
ASTM D 611.a Aniline Point of Petroleum Products	ASTM D 611.b Aniline Point, Mixed, of Petroleum Products	ASTM D 611.c Aniline Point, Thin Film, of Petroleum Products
EPA 300.1 Anions Content by Ion Chromatography	ASTM E 1787 Anions in Sodium Hydroxide and Potassium Hydroxide	ASTM D 4327.a Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 5006 Anti-Icing Inhibitors (Ether) in Aviation Fuel	ASTM E 979 Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids, Estimation of	ASTM D 3717 Antimony in Paint by AA Spectroscopy
ASTM D 6810 Antioxidant Concentration in HL Turbine Oils	ASTM D 7590 Antioxidant Content, Primary, in New or In-service Oils	ASTM D 1298 API Gravity of Petroleum Products, Hydrometer Method (Density, Relative Density, Specific Gravity)
ASTM D 287.a API Gravity, Hydrometer Method	ASTM D 1895 Apparent Density, Bulk Factor and Pourability	ASTM D 5293 Apparent Viscosity of Engine Oils, Cold Crank Simulator
ASTM D 3741 Appearance of Admixtures Containing Halogenated Organic Solvents	ASTM E 2680 Appearance of Clear, Transparent Liquids (Visual Inspection)	ASTM D 5292 Aromatic Carbon Content of Hydrocarbon Oil by NMR
EN 12916 Aromatic Content	ASTM D 5186 Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography	ASTM D 3257 Aromatic Content of Mineral Spirits by GC
IP 391 Aromatic Hydrocarbon Types in Aviation Fuel and Petroleum Distillates	ASTM D 6379 Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates	ASTM D 6591 Aromatic Hydrocarbon Types in Middle Distillates, High Performance Liquid Chromatography (HPLC) Method with Refractive Index Detection
ASTM D 3239 Aromatic Types in Gas Oil Fractions by GC-MS	ASTM D 2549 Aromatics and Non-aromatics Fractions by Elution Chromatography	ASTM D 6420.b Aromatics, Paraffins, and Olefins Content in Fuel Gas by GC-MS
ASTM D 4606 Arsenic and Selenium in Coal by AA/Hydride Generation	EPA 7060A Arsenic by AA, Furnace Technique. LOD = 0.05 ppm	ASTM D 2348 Arsenic in Paint
UOP 387 Arsenic in Petroleum Stocks and Catalysts by Spectrophotometry	ASTM D 2972 Arsenic in Water	ASTM D 5040 Ash Content of Adhesives
AASHTO T111 Ash Content of Bituminous Products	ASTM D 1119 Ash Content of Engine Coolants and Anti-Rusts	ASTM D 4422 Ash Content of Petroleum Coke
ASTM D 482 Ash Content of Petroleum Products	ASTM D 3174.a Ash in the Analysis Sample of Coal and Coke, wt%	ASTM D 1102 Ash in Wood
ASTM D 874 Ash, Sulfated Residue, Lube Oils and Additives	ASTM E 2403 Ash, Sulfated Residue, Organic Materials by Thermogravimetry	ASTM D 243 Asphalt Residue of Specified Penetration
IP 143 Asphaltenes	ASTM D 6560 Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products	DIN 51 794 Autoignition Temperature
ASTM E 659 Autoignition Temperature of Liquid Chemicals

B

ASTM D 4382 Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace	ASTM D 4628 Barium, Calcium, Magnesium and Zinc in Lube Oil by Atomic Absorption	ASTM D 4739 Base Number by Potentiometric Titration
ASTM D 5984 Base Number in New and Used Lubricants by Color Indicator Titration	ASTM D 2896 Base Number, Potentiometric Perchloric Acid Titration	ASTM D 3606 Benzene and Toluene in Finished Gasoline by GC
ASTM D 4492 Benzene by Gas Chromatography	ASTM D 4053 Benzene in Gasoline by Infrared Spectroscopy	ASTM D 4367 Benzene in Hydrocarbon Solvents by Gas Chromatography
ASTM D 6277 Benzene in Spark-Ignition fuels by Using Mid Infrared Spectroscopy	ASTM D 5769 Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography-Mass Spectrometry (GC-MS)	ASTM D 5580 Benzene, Toluene, Ethyl Benzene, Heavier Aromatics and Total Aromatics by GC
ASTM D 3645 Beryllium in Water, LOD = 0.05 ppm	OECD 301 B Biodegradibilty Test, OECD, by CO2 Evolution Test, DOC Analysis Measurement	ASTM D 4 Bitumen Content
ASTM D 2172 Bitumen Content in Paving Materials	BB-F-1421 B.b Boiling Point	DuPont F3205.b Boiling Point and Boiling Point Range by GC
ASTM D 7169 Boiling Point Distribution of Crude Oils and Vacuum Residues by Gas Chromatography	ASTM D 5399 Boiling Point Distribution of Hydrocarbon Solvents by GC	ASTM D 1120 Boiling Point of Engine Coolants
ASTM D 86.a Boiling Point of Petroleum Products at Atmospheric Pressure	BB-F-1421 B.g Boiling Point Range	ASTM D 5307 Boiling Range Distribution of Crude Petroleum, by GC
ASTM D 7096 Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography	ASTM D 7213 Boiling Range Distribution of Petroleum Distillates from 100° to 615°C by GC	ASTM D 6352 Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 720°C by Gas Chromatography, C10 to C100
ASTM D 2887.a Boiling Range Distribution of Petroleum Fraction by Gas Chromatography	ASTM D 3710 Boiling Range Distribution, Gasoline, by GC	ASTM D 3829 Borderline Pumping Temperature of Engine Oil
ASTM D 1246 Bromide Ion in Water, Ground Water, and Drinking Water.	ASTM D 1492 Bromine Index of Aromatic Hydrocarbons	ASTM D 2710 Bromine Index of Petroleum Hydrocarbons
ASTM D 1159 Bromine Number by Electrometric Titration Method	ASTM E 234 Bromine Number of Unsaturated Aliphatic Compounds	ASTM D 4292 Bulk Density, Vibrated, Calcined Petroleum Coke
ASTM D 187 Burning Quality of Kerosene, 16 hr and 48 hr	ASTM D 187/IP 10 Burning Quality of Kerosene, 16 hr and 48 hr	ASTM D 2426 Butadiene Dimer and Styrene in Butadiene Concentrates by GC

C

ASTM D 5373 C, H, N in Laboratory Samples of Coal and Coke, Instrumental Determination	ASTM D 3557 Cadmium in Water	ASTM D 511 Calcium and Magnesium in Water
EN 14538.a Calcium, Magnesium Content	ASTM D 5086 Calcium, Magnesium, Potassium, and Sodium by Flame AA Spectrometry	ASTM D 3588.a Calorific Value and Specific Gravity of Gaseous Fuels
ASTM D 5865 Calorific Value, Gross, of Coal and Coke	ASTM E 1821 Carbohydrates in Biomass by Gas Chromatography	ASTM D 3178 Carbon and Hydrogen in the Analysis Sample of Coal and Coke
ASTM D 3238 Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M	UOP 870 Carbon Number Distribution of Paraffins, Naphthenes and Aromatics by GC	ASTM D 4530 Carbon Residue (Micro Method)
ASTM D 189.a Carbon Residue, Conradson	ASTM D 189.b Carbon Residue, Conradson on 10% Residue	ASTM D 524.a Carbon Residue, Ramsbottom
ASTM D 524.b Carbon Residue, Ramsbottom on 10% Residue	ASTM D 5291.a Carbon, Hydrogen, and Nitrogen in Petroleum Products, Instrumental	ASTM D 565 Carbonizable Substances in White Mineral Oil
ASTM E 346 Carbonized Matter	EPA 554 Carbonyl by HPLC	ASTM E 411 Carbonyl Compound Trace, with 2,4-Dinitrophenylhydrazene
EPA 8315 Carbonyl Compounds by HPLC	UOP 624 Carbonyl Content	ASTM D 4423 Carbonyls in C4 Hydrocarbons
EPA 9080 Cation Exchange Capacity, CEC	ASTM D 2809 Cavitation Corrosion and Erosion Characteristics of New Aluminum Pumps With Engine Coolants	ASTM D 4737 Cetane Index, Calculated by Four Variable Equation
ASTM D 976 Cetane Index, Calculated, Includes API Gravity & Distillation	ASTM D 613 Cetane Number, Ignition Quality of Diesel Fuels	DuPont F3205.a Characterization of Fluorocarbon Refrigerants, GC
ASTM C 871 Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate and Sodium Ions	Std M 4500-CI-G Chloramines by Standard Method	ASTM D 5827 Chloride and Other Ions in Engine Coolants by Ion Chromatography
EPA 9212 Chloride in Aqueous Sample	ASTM D 2361 Chloride in Coal	UOP 456 Chloride in Refinery Waters
BB-F-1421 B.e Chloride in Refrigerants	ASTM D 3634 Chloride Ion in Engine Coolants	ASTM D 5542.a Chloride Ions by Ion Chromatography
ASTM D 4458 Chloride Ions in Brackish Water, Seawater & Brine	UOP 588 Chloride Organic and Inorganic, in Hydrocarbons	ASTM D 878 Chloride, Inorganic, and Sulfate in Insulating Oil
ASTM D 512 Chloride, Inorganic, in Water and Wastewater	ASTM D 4200 Chloride, Total, in Coal by Oxygen Bomb Combustion	ASTM D 4929 Chlorides, Organic, in Crude Oil (Naphtha Cut)
ASTM D 5317 Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector (GC ECD)	ASTM D 808 Chlorine (Total Halogens) in New and Used Oils, High Pressure Decomposition Device Method (HPDDM)	ASTM D 1317 Chlorine in New and Used Lubricants
ASTM E 776 Chlorine, Forms of, in Refuse in Refuse-Derived Fuel	EPA 9076 Chlorine, in New and Used Petroleum Products Total, by Microcoulometry	EPA 7197 Chromium Hexavalent Chelation
ASTM D 3718 Chromium in Paint by AA Spectroscopy	EPA 218.5 Chromium, Hexavalent, Dissolved (AA, Furnace)	ASTM D 2007 Clay-Gel Separation Test, Chromatographic Method for Characterizing Process Oils
ASTM D 4740 Cleanliness and Compatibility of Residual Fuels by Spot Test	IP 564 Cleanliness of Aviation Turbine Fuel – Laboratory Automatic Particle Counter Method	IP 565 Cleanliness of Aviation Turbine Fuels – Portable Automatic Particle Counter
SAE 749-D Cleanliness Test, Automated Particle Count	SAE 42067 Cleanliness Test, Microscope Examinations	MIL 565 Cleanliness Test, Millipore Examinations
ASTM D 2500 Cloud Point of Petroleum Products	ASTM D 5773 Cloud Point of Petroleum Products (Constant Cooling Rate Method)	ASTM D 5772 Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 5771 Cloud Point of Petroleum Products, Stepped Cooling Method	ASTM D 3558 Cobalt in Water	ASTM D 5183 Coefficient of Friction of Lubricants, Four-Ball
ASTM D 6371 Cold Filter Plugging Point of Diesel and Heating Fuels, CFPP	IP 309 Cold Filter Plugging Point, CFPP	EPA 9131 Coliform, Total (72 hour)
TOL SC 6028.a Collection and Microscopical Sizing, Counting of Particulates in Gas	ASTM E 1478 Color and Appearance, Visual	ASTM D 2392 Color of Dyed Aviation Gasolines
ASTM D 2108 Color of Halogenated Organic Solvents, Platinum-Cobalt Scale	ASTM D 6045 Color of Petroleum Products by Tristimulus Method	ASTM D 1544 Color of Transparent Liquids, Gardner Color Scale
ASTM D 1209 Color, APHA, Platinum-Cobalt Scale	ASTM D 1500 Color, ASTM Color Scale	ASTM D 156 Color, Saybolt Chromometer Method
ASTM D 3414 Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy	ASTM D 4054 Compatibility of Additives with Aviation Fuels	ASTM D 7155 Compatibility of Mixtures of Turbine Lubricating Oils
ASTM D 6733 Component Analysis of Spark Ignition Fuels by Gas Chromatography	ASTM D 2887.b Composition Breakdown (C4 to C40) by GC, Sludge	EN 14105 Composition Breakdown, Gas Chromatography
ASTM D 2650 Composition of Gases by Mass Spectrometry	ASTM D 2140 Composition of Insulating Oils, Carbon Type	ASTM D 1945.a Composition of Natural Gas by Gas Chromatography
GPA 2261 Composition of Natural Gas by Gas Chromatography (TCD/FID)	ASTM D 1945.b Composition of Natural Gas by Gas Chromatography, extended	GPA 2286 Composition of Natural gas by Gas Chromatography, extended to C14
ASTM D 1946 Composition of Reformed Gas by Gas Chromatography	ASTM D 3415 Composition of Waterborne Oils	ASTM D 938 Congealing Point of Petroleum Waxes
ASTM D 6482 Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)	ASTM D 6200 Cooling Characteristics of Quench Oils	ASTM D 6549 Cooling Characteristics of Quenchants by Cooling Curve Analysis, (Drayton Unit)
ASTM D 1688 Copper Content by Atomic Absorption or GFAA	ASTM D 6732 Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry	ASTM D 849 Corrosion from Industrial Aromatic Hydrocarbons, Copper Strip Tarnish Test
ASTM D 130 Corrosion from Petroleum Products, Copper Strip Tarnish Test, 2 hours @ 100°C	ASTM D 7095 Corrosion from Petroleum Products, Disposable Copper Foil Strip	NACE TM-01-72 Corrosion per NACE Standard TM-01-72
ASTM D 1743 Corrosion Preventive Properties, Greases	ASTM D 1384 Corrosion Test for Engine Coolants	ASTM D 2570 Corrosion Testing of Engine Coolants, Simulated Service Test
ASTM G 31 Corrosion Testing of Metals	ASTM D 1838 Corrosion, Copper Strip, Liquefied Petroleum Gas	ASTM D 4048 Corrosion, Copper Strip, Lubricating Greases
ASTM G 4 Corrosion, Test Metal Specimens (Request Quote)	DIN 51353 Corrosive Silver in Electrical Insulating Oil	ASTM D 1275 Corrosive Sulfur in Electrical Insulating Oil
ASTM D 1275.a Corrosive Sulfur in Electrical Insulating Oil – Part A	ASTM D 1275.b Corrosive Sulfur in Electrical Insulating Oil – Part B (48 hrs)	ASTM D 4636 Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ASTM D 6594 Corrosiveness of Diesel Engine Oil at 135°C	EPA 1110 Corrosivity Toward Steel, Coupon	NACE TM-01-69 Corrosivity, NACE Standard TM-01-69
EPA 9045C Corrosivity, pH by Glass Electrode	BMCI Crude Oil Classification, Bureau of Mines Index	TOL 5048 Crude Oil Classification, Paraffinic or Asphaltinic
EPA Appendix 5 Crude Oil Contamination in Non-Aqueous Drilling Fluids by GC-MS, Appendix 5 Subpart A of Part 435	EPA 9010B Cyanide, Reactive	EPA 9012A Cyanide, Total, Solid Waste

D

ASTM D 2711 Demulsibility Characteristics of Lubricating Oils	ASTM D 5002 Density and Relative Density of Crude Oils by Digital Density Analyzer	ASTM D 5931 Density and Relative Density of Engine Coolants
ASTM D 4052 Density and Relative Density of Liquids by Digital Density Meter	ASTM D 1480 Density and Relative Density of Viscous Materials by Bingham Pycnometer	ASTM D 5004 Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D 1217 Density of Liquids by Bingham Pycnometer	ASTM D 71 Density of Solid Pitch and Asphalt (Displacement Method)	ASTM D 3505 Density or Relative Density
ASTM D 1122 Density or Relative Density of Engine Coolant Concentrates and Engine Coolants	ASTM D 2427 Determination of C2 through C5 Hydrocarbons by GC (Fractionation)	ASTM D 1142.b Dew-Point Temperature at specified psia
ASTM D 3300 Dielectric Breakdown Voltage of Insulating Oils Under Impulse Conditions	ASTM D 877 Dielectric Breakdown Voltage, Disc Electrodes	ASTM D 1816 Dielectric Breakdown Voltage, VDE Electrodes
ASTM D 924.a Dielectric Constant and Power Factor of Electrical Insulating Liquids, 60 Hz, 25°C	IEC 60247/IEC 61620 Dielectric Dissipation Factor	UOP 326 Diene Value
IP 21 Diesel Index, Calculated Value	ASTM D 3524 Dilution of Crankcase Oils, Diesel Engine Oils by Gas Chromatography	ASTM D 3525 Dilution of Crankcase Oils, Gasoline Engine Oils, by Gas Chromatography
EPA 8280 Dioxins Scan, Low Resolution	ASTM D 3612 Dissolved Gases in Electrical Insulating Oil by Gas Chromatography	ASTM D 5543 Dissolved Oxygen in Water
ASTM D 20 Distillation of Bituminous Materials (Road Tars)	ASTM D 402 Distillation of Cut-Back Asphaltic Products	ASTM D 5236 Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
ASTM D 86.b Distillation of Petroleum Products at Atmospheric Pressure	ASTM D 1160.b Distillation of Petroleum Products at Reduced Pressures, at 10 mm	ASTM D 1160 Distillation of Petroleum Products at Reduced Pressures, at 5 and 10 mm
ASTM D 1160.a Distillation of Petroleum Products at Reduced Pressures, at 5 mm	ASTM D 1078 Distillation Range of Volatile Organic Liquids	ASTM D 850 Distillation, Industrial Aromatic Hydrocarbons
ASTM D 4952 Doctor Test, Sulfur Species in Fuels and Solvents	ASTM D 2265 Dropping Point of Lubricating Greases, Wide Temperature Range	ASTM D 566 Dropping Point, Lubricating Greases
ASTM D 2713 Dryness of Propane, Valve Freeze Method (Performed on site only)	ASTM D 113 Ductility of Bituminous Materials	ASTM D 2240 Durometer Hardness of Rubber

E

ASTM D 4289 Elastomer Compatibility of Lubricating Greases and Fluids	ASTM D 471 Elastomer Compatibility, Hardness and Relative Volume Change	ASTM D 1125 Electrical Conductivity and Resistivity of Water
ASTM D 4308 Electrical Conductivity of Liquid Hydrocarbons	ASTM D 2624 Electrical Conductivity, Aviation Fuels	EPA 120.1 Electrical Conductivity, Water and Wastewater
ASTM D 3682 Elemental Analysis Coal and Coke Ash by AA	ASTM D 6349 Elemental Analysis of Coal, Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma-Atomic Emission Spectrometry	ASTM D 4927 Elemental Analysis of Lubricants and Additives per element
ASTM D 1401 Emulsion Characteristics of Lubricating Oils (Water Separability)	ASTM D 1665 Engler Specific Viscosity of Tar Products	ASTM D 1652 Epoxy Content of Epoxy Resins
EN 14103 Ester Content	ASTM D 5501 Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography	ASTM D 2505 Ethylene and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
ASTM E 202.b Ethylene Glycols and Propylene Glycols by Gas Chromatography (Method B)	ASTM D 2595 Evaporation Loss of Lubricating Greases	ASTM D 972 Evaporation Loss of Lubricating Greases and Oils
ASTM D 5800 Evaporation Loss of Lubricating Oils by the Noack Method	ASTM D 6375 Evaporation Loss of Lubricating Oils by ThermoAnalizer (Noack Method)	DIN 51.581 Evaporation Loss of Lubricating Oils, Noack Test
ASTM D 3539 Evaporation Rate of Volatile Liquids, Relative to Butyl Acetate = 1	EPA 9023 Extractable Organic Halides (EOX) in Solids	EPA 1310A Extraction Procedure (EP) Toxicity Test Method
EPA 1330A Extraction Procedure for Oily Wastes	EPA 3810 Extraction Procedure, Zero-Head Space, Purgables	ASTM D 2596 Extreme Pressure Properties of Greases, Four-Ball
ASTM D 3233 Extreme Pressure Properties of Lubricants, Falex Pin and Vee-Block	ASTM D 2783 Extreme-Pressure Properties of Fluids, Four-Ball	ASTM D 2782 Extreme-Pressure Properties of Fluids, Timken

F

ASTM D 2625 Falex Pin and Vee-Block Test for Load Carrying Capacity of Solid Film Lubricants	ASTM D 7371 FAME Content of Diesel Fuel Oil, by Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)	EN 14078 Fatty Acid Methyl Ester
Atlas.a Ferrography, Analytical	Atlas.b Ferrography, Direct Reading and Analytical (Trend)	ASTM D 4305 Filter Flow of Aviation Fuels at Low Temperature
IP 387 Filter Plugging Tendency of Distillate	ASTM D 2068 Filter Plugging Tendency of Distillate Fuel Oils	ASTM D 4539 Filterability of Diesel Fuels by Low Temperature Flow Test (LTFT) Method
ASTM D 6426 Filterability of Middle Distillate Fuel Oils	ASTM D 6751.a Filterability, Cold Soak Filtration Test (CSFT), ASTM D 6751 Annex 1	ASTM D 5907 Filterable and Nonfilterable Matter in Water
ASTM D 92.b Fire Point, Cleveland Open Cup	ASTM D 3172.c Fixed Carbon	ASTM D 388 Fixed Carbon, Calculated
EPA 7000B Flame Atomic Absorption Spectro (Consolidate FLAA). LOD = 0.05 ppm, per element	ASTM D 5306 Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids	ASTM E 681 Flammability of Chemicals, Upper and Lower Limits
DIN 51 755 Flash Point	ASTM D 92.c Flash Point and Fire Point, Cleveland Open Cup	ASTM D 7236 Flash Point by Small Scale Closed Cup Tester, (Ramp Method)
ASTM D 3278 Flash Point of Liquids by Small Scale Closed Cup Apparatus (Seta-Flash)	ASTM D 92.a Flash Point, Cleveland Open Cup	ASTM D 6450 Flash Point, Continuous, by Closed Cup
ASTM D 93 Flash Point, Pensky-Martens Closed Cup	ASTM D 3828 Flash Point, Small Scale Closed Tester, Seta-Flash, -30 to 300°C Range	ASTM D 56 Flash Point, Tag Closed Tester
ASTM D 1310 Flash Point, Tag Open Cup	ASTM D 3143 Flash Point, Tag Open Cup, Cutback Asphalt	ASTM D 7060 Flocculation Ratio and Peptizing Power of Asphaltenes in Residual and Heavy Fuel Oils
FTM 1303.1 Flock Point, Refrigerant Compressor Oil	ASTM D 6351 Fluidity of Hydraulic Fluids at Low Temperature	EPA 340.2 Fluoride Content, Ion Selective Electrode
ASTM D 1179 Fluoride Ion in Water	ASTM D 3868 Fluoride Ions in Brackish Water, Seawater, and Brines	ASTM D 3761 Fluorine, Total, in Coal by Oxygen Bomb Combustion
ASTM D 3519 Foam in Aqueous Media, Blender Test	ASTM D 6082 Foaming Characteristics of Lubricating Oils, High Temperature	ASTM D 1881 Foaming Tendencies of Engine Coolants
ASTM D 4921 Foaming Tendencies of Engine Coolants at Room Temperature, Shake Test	ASTM D 892 Foaming Tendencies of Lubricating Oils	UOP 79 Fractionation of Petroleum Distillates
ASTM D 4176.a Free Water and Particulate Contamination in Distillate Fuels	ASTM D 4860 Free Water and Particulate Contamination in Mid-Distillate Fuels	ASTM D 1835.a Free Water Content, Visual Method
ASTM D 1177 Freezing Point of Aqueous Engine Coolants	ASTM D 3321 Freezing Point of Aqueous Engine Coolants, Refractometer Method	ASTM D 2386 Freezing Point of Aviation Fuels
ASTM D 7153 Freezing Point of Aviation Fuels, Automatic Laser Method	ASTM D 5901 Freezing Point of Aviation Fuels, Automatic Optical Method	ASTM D 5972 Freezing Point of Aviation Fuels, Automatic Phase Transition Method
ASTM D 1015 Freezing Points of High Purity Hydrocarbons	ASTM D 4170 Fretting Wear Protection by Lubricating Greases and Fluids	ASTM D 5275 Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
ASTM D 5837 Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography	IEC 61198 Furfural Content	ASTM D 1857 Fusibility of Coal and Coke Ash

G

ASTM D 3427 Gas Bubble Separation Time of Petroleum Oils (Air Release Properties)	ASTM D 6420 Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry (GC-MS)	ASTM D 6420.a Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry (GC-MS)
EPA 25EM Gaseous Organic Emissions	EPA 25M Gaseous Organic Emissions	ASTM D 2300 Gassing Tendency of Insulating Oils under Electrical Stress
ASTM E 1824 Glass Transition Temperature by Thermomechanical Analysis Under Tension	ASTM D 6584 Glycerin, Free and Total, in Biodiesel Fuel B 100 (Methyl Esters) by Gas Chromatography (GC)	ASTM D 3695 Glycol and/or Alcohol in Water by Gas Chromatography
ASTM E 202.a Glycol Composition by Gas Chromatography	ASTM D 2982 Glycol-Base Antifreeze in Used Lubricating Oils	ASTM E 711 Gross Calorific Value of Refuse-Derived Fuel
ASTM D 381.a Gum Content, Existent, in Fuels by Air Jet Evaporation	ASTM D 381.b Gum Content, Existent, in Fuels by Steam Jet Evaporation

H

ASTM D 2988 Halide Ion, Water Soluble, in Halogenated Organic Solvents	EPA 552.2 Haloacetic Acid Compounds	EPA 8010B Halogenated Volatile Organics by GC, Purge & Trap
EPA 9021 Halogens, Purgeable Organic (POX)	EPA 9020B Halogens, Total Organic (TOX), Carbon Adsorption with a Microcoulometric-Titration Detector	ASTM D 5003 Hardgrove Grindability Index (HGI) of Petroleum Coke
ASTM D 1126 Hardness in Water	CPL Scale Haze on Diesel Oil, Colonial Pipeline Scale	ASTM D 2872 Heat Aging of Asphalt Film, Rolling Thin-Film Oven Test (RTFOT)
ASTM D 2890 Heat Capacity of Petroleum Distillate Fuels	ASTM D 3338 Heat of Combustion of Aviation Fuels, estimated	ASTM D 1405 Heat of Combustion of Aviation Fuels, Net, estimated
ASTM D 4809 Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter	ASTM D 4529 Heat of Combustion, Aviation Fuels, estimation of	ASTM D 240 Heat of Combustion, by Bomb Calorimeter
ASTM D 4868 Heat of Combustion, Estimation of Gross/Net Heat	ASTM E 2160 Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry	EPA 515 Herbicides
EPA 1664A Hexane Extractable Material (HEM; Oil and Grease), and Silica Gel Treated n-Hexane Extractable Material(SGT-HEM)	BB-F-1421 B.d High Boiling Impurities	BB-F-1421 B.a High Boiling Residues
ASTM D 6922 Homogeneity and Miscibility in Automotive Engine Oils	TOL 4-1790 Humic Acid, Ulmic Acid, Fulvic Acid Detection, Liquid	TOL 4-2090 Humic Acid, Ulmic Acid, Fulvic Acid Detection, Solids
ASTM D 6159 Hydrocarbon Impurities in Ethylene by Gas Chromatography	ASTM D 2425 Hydrocarbon Types (Paraffins, Cycloparaffins, Aromatics) in Middle Distillates, Mass Spectrometry	ASTM D 2786 Hydrocarbon Types in Gas Oils by Mass Spectrometry
ASTM D 1319 Hydrocarbon Types in Liquid Petroleum by Fluorescent Indicator Absorption (FIA)	ASTM D 2789 Hydrocarbon Types in Low Olefinic Gasoline by MS	ASTM D 6839 Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Fuels by GC
ASTM D 3343 Hydrogen Content of Aviation Fuel	ASTM D 3701 Hydrogen Content of Aviation Turbine Fuels by NMRS	ASTM D 4808 Hydrogen Content of Distillates by NMR Spectroscopy (NMRS)
ASTM D 7171 Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy	ASTM D 1018 Hydrogen in Petroleum Fractions	UOP 163 Hydrogen Sulfide and Mercaptan Sulfur in Petroleum Products
ASTM D 853 Hydrogen Sulfide and Sulfur Dioxide in Aromatic Hydrocarbons, Qualitative	IP 399 Hydrogen Sulfide in Fuel Oils	ASTM D 4084 Hydrogen Sulfide in Gaseous Fuels, Lead Acetate Method
ASTM D 2420 Hydrogen Sulfide in Liquefied Petroleum (LP) Gases	ASTM D 4810 Hydrogen Sulfide in Natural Gas Using Length of Stain Detector Tubes	ASTM D 5705 Hydrogen Sulfide, Measurement of, in the Vapor Phase Above Residual Fuels
ASTM D 6447 Hydroperoxide Number by Volumetric Analysis	ASTM D 2193 Hydroquinone in Vinyl Acetate	ASTM D 1957 Hydroxyl Number of Drying Oils and Fatty Acid
ASTM D 4274 Hydroxyl Number of Polyols

I

EPA 1030 Ignitability of Solids	EPA 1010 Ignitability, Flash Point, Pensky-Martens (PMCC)	EPA 1020 Ignitability, Flash Point, Seta-Flash Closed Cup
ASTM E 1618 Ignitable Liquid Residues in Extracts from Fire Debris Samples by GC-MS	ASTM D 2306 Impurities in Aromatic Hydrocarbons by GC	ASTM D 5060 Impurities in High Purity Ethyl benzene by Gas Chromatography
ASTM D 2360 Impurities in Monocyclic Aromatic Hydrocarbons by GC	ASTM D 525 Induction Period, Gasolines (Oxidation Stability)	TOL 5047.b Infrared Spectrochemistry; Fuel Soot, Oxidation, Nitration
TOL 5047.a Infrared Spectrochemistry; Full Spectrum FT-IR	ASTM D 6174 Inorganic Sulfate	EPA 6010B Inorganics by Atomic Emission Spectroscopy (ICP), per element
ASTM D 4898 Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis	ASTM D 7317 Insolubles in Use Lubricating Oils by LMOA Paper Filtration Method	ASTM D 893 Insolubles in Used Lubricating Oils
ISO 6295 Interfacial Tension	ASTM D 971 Interfacial Tension of Oil against Water by the Ring Method	ASTM D 2285 Interfacial Tension of Oils by Drop-Weight Method
ASTM D 3869 Iodide and Bromide Ions in Brackish Water, Seawater, and Brines	ASTM D 5542.b Iodide Ions by Ion Chromatography	ASTM D 1959 Iodine Value of Drying Oils and Fatty Acids
ASTM D 5554 Iodine Value of Fats and Oils	ASTM D 5768 Iodine Value of Tall Oil Fatty Acids	UOP 314 Iron and Copper in Refinery Waters
ASTM E 394 Iron in Trace Quantities	ASTM D 2422 ISO Viscosity Grade	ASTM D 3760 Isopropyl benzene (Cumene) Analysis by Gas Chromatography

J

Nothing found for the letter J.

K

ASTM D 1133
Kauri-Butanol Value of Hydrocarbon Solvents

ASTM D 909
Knock Characteristics of Aviation Gasolines by the Supercharge Method

L

ASTM E 1613.b Lead by Inductively Coupled Plasma – Atomic Emission Spectrometry	EPA 7421 Lead Content, Atomic Absorption Graphite Furnace	ASTM D 3341 Lead in Gasoline by Iodine Monochloride Method
ASTM D 5059.a Lead in Gasoline by X-ray Spectroscopy (Method A and B) (Leaded Grade)	ASTM D 5059.b Lead in Gasoline by X-ray Spectroscopy (Method C) (Unleaded Grade)	ASTM D 3237 Lead in Unleaded Gasoline by Atomic Absorption Spectrometry, LOD = <0.03 g/L
ASTM D 3559 Lead in Water	TEX 406-A Limestone Content	ASTM D 2598 Liquefied Petroleum (LP) Gases, Physical Properties Calculated from Compositional Analysis
ASTM D 3340 Lithium and Sodium in Lubricating Greases by Flame Photometer	ASTM E 1868 Loss on Drying by Thermogravimetry	ASTM D 1754 Loss on Heating of Asphaltic Materials, Thin Film Oven Test
ASTM D 4693 Low Temperature Performance of Grease-Lubricated Wheel Bearings	ASTM D 5001 Lubricity of Aviation Turbine Fuels, Ball-on-Cylinder Lubricity Evaluation (BOCLE)	ASTM D 6079 Lubricity of Diesel Fuels by the High Frequency Reciprocating Rig (HFRR)
ASTM D 6078.a Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator, (SLBOCLE), Procedure A: Incremental Load	ASTM D 6078.b Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator, (SLBOCLE). Procedure B: Single-Load Test	ASTM D 1740 Luminometer Numbers of Aviation Fuels

M

ASTM D 3831 Manganese in Gasoline by AA Spectrometry	ASTM D 87 Melting Point of Petroleum Wax	ASTM D 127 Melting Point of Petroleum Wax and Petroleum, Drop Melting Point
ASTM D 3277 Mercaptan Sulfur in Gasoline, Kerosene and Distillate Fuels	ASTM D 3227 Mercaptan Sulfur, Potentiometric Method	ASTM D 1988 Mercaptans in Natural Gas Using Length of Stain Detector Tubes
EPA 7040A Mercury by Cold Vapor Atomic Absorption, Limit of Detection. LOD = 0.05 ppm	EPA 245.1 Mercury by Cold Vapor Atomic Absorption, LOD = 0.05 ppm	EPA 7470A Mercury, by Cold Vapor Atomic Absorption, Liquid Waste
EPA 7471A Mercury, by Cold Vapor Atomic Absorption, Solid Waste	ASTM D 6414 Mercury, Total, in Coal by Acid Extraction/Cold Vapor AA	ASTM D 6722 Mercury, Total, in Coal by Direct Combustion Analysis
ASTM D 3684 Mercury, Total, in Coal by Oxygen Bomb Combustion	ASTM D 3223 Mercury, Total, in Water	ASTM D 5619 Metal removal Fluids by Tapping Torque Test
Std M 3110 Metals Analysis, Examination of Water and Wastewater	ASTM D 6728 Metals and Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry	EPA 7000A Metals by Atomic Absorption (AA). LOD = 0.05 ppm, per element
ASTM E 1184 Metals by Graphite Furnace Atomic Absorption Spectroscopy, GFAA. Includes: Vanadium, Sodium, Potassium, Lithium, Lead, and Calcium. LOD = 0.01 ppm	ASTM E 1613.a Metals by ICP-AES, Semi-Quantitative Scan, 27 metals	EPA 6010B.1 Metals by Inductively Coupled Plasma – Atomic Emission Spectroscopy (ICP-AES), on Soils, Sludge, Solids, and Petroleum Products. Includes: Arsenic, Cadmium, Chromium, and Lead. Limit of Detection. LOD = 1 ppm
EN 14538 Metals Content	TOL 5053 Metals Detection by X-Ray	ASTM D 4075 Metals in Compounding Materials, Flame AA, per element
UOP 848 Metals in Gas Oils by AAS; V, Fe, Pb, Cu, Na	ASTM D 7303 Metals in Lubricating Greases by ICP-AES	ASTM D 5600 Metals in Petroleum Coke by Inductively Coupled Plasma Atomic – Emission Spectrometry (ICP-AES)
ASTM E 885 Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy	EPA 6020 Metals in Water by Inductively Coupled Plasma – Mass Spectrometry, per element	ASTM D 1976 Metals in Water or Aqueous Matrices by ICP-AES
EN 14110 Methanol Content	ASTM D 7059 Methanol in Crude Oil by Gas Chromatography	UOP 845 Methanol in LPG by GC
ASTM D 1152 Methanol Purity	ASTM D 5441 Methyl Tert-Butyl Ether (MTBE) in Gasoline by Gas Chromatography	ASTM E 1259 Micro-Organism Anti-Microbial Culture Study in Fuel Oils, bacteria count/mL
ASTM D 6469 Microbial Contamination in Fuels and Fuel Systems	TOL 7074 Microscope Examination and Microphotography	ASTM F 312 Microscopical Sizing, Counting Particles from Aerospace Fluids on Membrane Filters
ASTM D 1142 Moisture Content by Measurement of Dew Point	ASTM D 3173 Moisture in the Analysis Sample of Coal and Coke	ASTM D 3180.b Moisture, As-Received Basis, Calculated from As-Determined Basis
ASTM D 2974 Moisture, Ash, and Organic Matter of Peat and Other Organic Soils	ASTM D 3180.a Moisture, Dry Basis, Calculated from As-Determined Basis	ASTM D 3302 Moisture, Total, in Coal
ASTM D 2961 Moisture, Total, in Coal Reduced to 2.36 mm. Top size	ASTM D 2503 Molecular Mass of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure	ASTM D 5296 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High-Performance Size-Exclusion Chromatography
ASTM D 2502 Molecular Weight from Viscosity Measurements	ASTM D 3372 Molybdenum in Water	ASTM D 3125 Monomethyl Ether of Hydroquinone (MEHQ) in Acrylate Esters and Acrylic Acid
ASTM D 4815 MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 in Gasoline by GC

N

EPA 9071B n-Hexane Extractable Material (HEM)/oil & grease	ASTM D 1840 Naphthalene Content in Aviation Turbine Fuels	ASTM D 1977 Nickel and Vanadium in FCC Equilibrium Catalysts by Acid Decomposition and Atomic Spectroscopy Determination
ASTM D 5708 Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma – Atomic Emission Spectrometry (ICP-AES)	ASTM D 5863 Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels	EPA 9200 Nitrate
EPA 353.4 Nitrate and Nitrite, Colorimetric	ASTM D 3867 Nitrite-Nitrate in Water	UOP 939 Nitrogen Content by Ion Chromatography
ASTM D 5762 Nitrogen in Petroleum and Petroleum Products	ASTM D 3179 Nitrogen in the Analysis Sample of Coal and Coke	EPA 350.1 Nitrogen, (Ammonia), Colorimetric
ASTM D 4629 Nitrogen, Organically Bound, by Chemiluminescence	ASTM D 3228 Nitrogen, Total, in Petroleum Products by Modified Kjeldahl Method	EPA 8015B Non-halogenated Organics Using GC-FID
EPA 8015C Non-halogenated Volatiles (GRO, DRO) by GC-FID	ASTM D 2109 Non-volatile Matter in Halogenated Organic Solvents	ASTM D 1025 Non-volatile Residue of Butadiene, Polymerization Grade
ASTM D 1353 Nonvolatile Matter in Volatile Solvents	ASTM F 331 Nonvolatile Residue of Solvent Extract from Aerospace

O

ASTM D 3797 o-xylene Analysis by Gas Chromatography	ASTM D 2700 Octane Number, Motor Method	ASTM D 2699 Octane Number, Research (Addition)
ASTM D 1292 Odor in Water	ASTM D 1296 Odor of Volatile Solvents and Diluents	ASTM D 4281 Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
ASTM D 3921 Oil and Grease Content in Water – Fluorocarbon-extractable Substances	EPA 1664 Oil and Grease Content, Sludge by Extraction	EPA 9070 Oil and Grease Content, Total Recoverable – Gravimetric
EPA 9071A Oil and Grease, Extraction for Sludge and Sediment	ASTM D 721 Oil Content of Petroleum Waxes	ASTM D 6184 Oil Separation from Lubricating Grease (Conical Sieve Method)
ASTM D 1742 Oil Separation from Lubricating Grease, Bleed	ASTM D 5739.a Oil Spill Source Identification by Gas Chromatography-Mass Spectrometry (GC-MS)	ASTM D 6550 Olefin Content by Supercritical Fluid Chromatography
ASTM D 6296 Olefins in Spark-Ignition Engine Fuels by Multi-dimensional Gas Chromatography	ASTM D 5808 Organic Chloride in Aromatic Hydrocarbons by Microcoulometry	ASTM D 5739.b Organic Composition Breakdown by GC-MS
ASTM D 4128 Organic Compounds in Water by Gas Chromatography and Mass Spectrometry (GC-MS)	EPA 624 Organic Compounds, Purgables, by GC-MS	ASTM D 5812 Organochlorine Pesticides in Water by Capillary Column Gas Chromatography
ASTM E 1858 Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry	ASTM D 5483 Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry	ASTM D 4768 Oxidation Inhibitor in Insulating Oil by Gas Chromatography
ASTM D 2668 Oxidation Inhibitor in Insulating Oil by Infrared Absorption	ASTM D 5763 Oxidation of Gear Oils	ASTM E 2009 Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
Std M 2580 Oxidation Reduction Potential	EN 14112 Oxidation Stability	ASTM D 2272.b Oxidation Stability by Modified Rotating Pressure Vessel
ASTM D 2272.a Oxidation Stability by Rotating Pressure Vessel Method, RPVOT (previously RBOT)	ASTM D 7462 Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel	ASTM D 7098 Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D 7214 Oxidation Stability of Used Lubricants by FT-IR	ASTM D 4742 Oxidation Stability, Automotive Engine Oils by Thin Film Oxygen Uptake, TFOUT	ASTM D 6468 Oxidation Stability, Distillate Fuels
DuPont F-21 Oxidation Stability, DuPont, including Color	ASTM D 2893 Oxidation Stability, Extreme Pressure Lubricating Oils	ASTM D 943 Oxidation Stability, Inhibited Steam Turbine Oils ( 2000 Hours)
ASTM D 2274 Oxidation Stability, Light Fuel Oils, 16 hr	ASTM D 942 Oxidation Stability, Lubricating Grease, Oxygen Bomb Method (Oxy Bomb)	ASTM D 2440.a Oxidation Stability, Mineral Insulating Oil, 164 hr
ASTM D 2440.b Oxidation Stability, Mineral Insulating Oil, 72 hr	ASTM D 2112 Oxidation Stability, Mineral Insulating Oils, RPVOT (previously RBOT)	ASTM D 873 Oxidation Stability, Potential Residue Method
ASTM D 5846 Oxidation Test for Hydraulic and Turbine Oils using the Universal Oxidation Test Apparatus	ASTM D 6514 Oxidation Test for Turbine Oils, High Temperature Universal Method	ASTM D 6293 Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography
ASTM D 6733M Oxygenates by Gas Chromatography	ASTM D 5599 Oxygenates in Gas by Gas Chromatography	ASTM D 5986 Oxygenates, Benzene, Toluene, C8-C12 Aromatics in Finished Gasoline by GC

P

ASTM D 4590 p-tert-Butylcatechol in Styrene Monomer	ASTM D 3798 p-xylene Analysis by Gas Chromatography	ASTM D 5443 Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography
SAE ARP 785 Particle Contamination in Hydraulic Fluids	ASTM D 6786 Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters	SAE ARP 598 Particle Count, Automatic Optical Counter
NAS 1638 Particle Count, Automatic Optical Particle Count	ISO 4406 Particle Count, Automatic Optical Particle Count	ASTM E 11 Particle Size Analysis, Dry Sieve, per fraction
TOL 5052 Particle Size and Distribution by Automated Optical Laser Particle Analyzer with Customer Designated Size Partition Limits	ASTM D 4464 Particle Size Distribution of Catalytic Material by Laser Light Scattering	ASTM D 4513 Particle Size Distribution of Catalytic Material by Sieving per sieve
ASTM D 244 Particles for Emulsified Asphalts	ASTM D 1404 Particles, Deleterious, in Lubricating Greases	ASTM D 2276 Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM F 311 Particulate Contamination Analysis Using Membrane Filters	ASTM D 5452 Particulate Contamination in Aviation Fuels by Laboratory Filtration	ASTM D 6217 Particulate Contamination in Middle Distillate Fuels by Filtration
TOL SC 6028.b Particulates in Gas, Maximum Size, um	ASTM E 1147 Partition Coefficient by Liquid Chromatography	ASTM D 6160.b PBBs in Liquid and Solid Wastes: Oils and Sludges, etc. – Modified Method
IEC 61619 PCB Content	TOL 5049 PCB Content, Screening Test in Oil, ppm	EPA 8082 PCBs by Cap Column GC
EPA 8082A PCBs by GC	ASTM D 4059 PCBs in Insulating Oil by Gas Chromatography	ASTM D 6160.a PCBs in Liquid and Solid Wastes: Oils and Sludges, etc.
EPA 8080A PCBs in Soil by Extraction and Gas Chromatography	EPA 600 PCBs in Transformer Insulating Oils by GC	EPA 8141 Pendimethalin (Penoxalin)
ASTM D 1403 Penetration, Cone, Lubricating Grease, Half-Scale	ASTM D 5 Penetration, Cone, of Bituminous Materials	ASTM D 217.a Penetration, Cone, of Lubricating Greases, Unworked
ASTM D 217.b Penetration, Cone, of Lubricating Greases, Worked	ASTM D 937 Penetration, Cone, of Petrolatum	ASTM D 1321 Penetration, Needle, of Petroleum Waxes
ASTM D 4055 Pentane Insolubles by Membrane Filtration	TOL 5050 Percent Antifreeze	ASTM D 1363 Permanganate Time of Acetone and Methanol
ASTM E 299 Peroxide Content, Trace, in Organic Solvents	ASTM D 3703 Peroxide Number of Aviation Turbine Fuels	ASTM D 2340 Peroxides in Styrene Monomer
ASTM D 5134 Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography	ASTM D 5442 Petroleum Waxes by Gas Chromatography	ASTM D 5464 pH Measurement of Water of Low Conductivity
ASTM E 70 pH of Aqueous Solutions with Glass Electrode	ASTM D 1287 pH of Engine Coolants, Antifreezes and Anti-Rusts	ASTM D 4972 pH of Soils
EPA 9040B pH of Solid Wastes, Electrometric Measurement	ASTM D 4980 pH of Waste by Screening Test	ASTM D 1293 pH of Water
ASTM D 2110 pH of Water Extractions of Halogenated Organic Solvents	ASTM D 6423 pHe of Ethanol, Denatured Ethanol and Fuel Ethanol	EPA 420.1 Phenolics, Total Recoverable
EPA 420.2 Phenols by Spectrophotometry	ASTM D 7040 Phosphorous in Unused Engine Oils by ICP	ASTM D 4951.b Phosphorus Content in Biodiesel Fuels by ICP-AES
ASTM D 3231 Phosphorus in Gasoline, Gravimetric, g/gal	ASTM D 1091 Phosphorus in Lubricating Oils and Additives	Visual Physical Appearance
ASTM D 6730 PIONA Analysis by Gas Chromatography	IP 346 Poly Aromatic Compounds, PACs, DMSO Extraction	ASTM D 6209 Polycyclic Aromatic Hydrocarbons (PAH), Gaseous and Particulate, in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
ASTM D 2121 Polymer Content of Styrene Monomer	EPA 1654 Polynuclear Aromatic Hydrocarbon Compounds (PAH)	EPA 610 Polynuclear Aromatic Hydrocarbons (PAH), Wastewater, GC
EPA 8100 Polynuclear Aromatics Hydrocarbons by FID	TOL T 5035 Polypropylene Contamination in Residual Fuel Oils	EN 14538.b Potassium and Sodium Content
ASTM D 5853 Pour Point of Crude Oils	ASTM D 97 Pour Point of Petroleum Oils	ASTM D 5950 Pour Point of Petroleum Oils, Automated Method
ASTM D 5949 Pour Point of Petroleum Products, Automatic Pressure Pulsing Method	ASTM D 5985 Pour Point, Instrumental	ASTM D 91 Precipitation Number of Lubricating Oils
ASTM D 2013 Preparing Coal Samples for Analysis	ASTM D 3172.a Proximate Analysis of Coal and Coke – Referee Method	ASTM D 5142.a Proximate Analysis of Coal and Coke, Instrumental – Package
ASTM D 3245 Pumpability of Industrial Fuel Oils	EPA 602 Purgeable Aromatics by GC	EPA 601 Purgeable Halocarbons in Wastewater by GC
ASTM D 5790 Purgeable Organic Compounds in Water by Capillary Column GC-MS	ASTM E 928 Purity by Differential Scanning Calorimetry	ASTM D 3362 Purity of Acrylate Esters by Gas Chromatography
ASTM D 2192 Purity of Aldehydes and Ketones	ASTM D 1016 Purity of Hydrocarbons from Freezing Points	ASTM D 2804 Purity of Methyl Ethyl Ketone by GC, Includes weight percent Alcohol
ASTM D 5135 Purity of Styrene by Capillary Gas Chromatography (GC)	ASTM D 3677 Pyrolysis FT-IR for Polymer Identification

Q

ASTM D 3520
Quenching Time of Heat Treating Fluid by Magnetic Quenchometer Test

ASTM D 2318
Quinoline Insoluble (QI) Content of Tar and Pitch

R

EPA 900 Radiological	ASTM D 3850 Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)	ASTM D 6258 Red 164 Dye Concentration in Diesel Fuels
ASTM D 1218 Refractive Index and Refractive Dispersion of Hydrocarbon Liquids	ASTM D 1747 Refractive Index of Viscous Materials	ASTM D 1657 Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
ASTM D 1121 Reserve Alkalinity of Engine Coolants and Anti-rusts	ASTM D 1253 Residual Chlorine in Water	ASTM D 2158 Residual Matter in Liquefied Petroleum Gases
ASTM D 1831 Roll Stability of Lubricating Grease, After 2 hours at Ambient Temperature	ASTM D 1240 Rosin Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products	ASTM D 665.a Rust Preventing Characteristics
ASTM D 665.b Rust Preventing Characteristics in Synthetic Sea Water	ASTM D 3603 Rust Preventing Characteristics of Steam Turbine Oils	NACE TM-10-72 Rust Preventing Characteristics, Gasoline

S

FS SS-S-210A Sag, Flow Resistance, Vertical or Overhead Joints	Std M 210B Salinity	ASTM D 3230 Salt Content of Crude Oil, Electrometric Method
ASTM D 6470 Salt Contents of Crude Oil, Potentiometric Method	ASTM C 1234 Sample Preparation of Oils and Oily Wastes by High-Pressure, High-Temperature Digestion for Trace Element Determinations	ASTM D 1971 Sample Preparation of Water Samples by Acid Digestion
ASTM D 6800 Sample Preparation of Water Samples Using Reductive Precipitation Pre-concentration Technique for ICP-MS Analysis of Trace Metals	EPA 3010A Sample Preparation, Acid Digestion Aqueous Extracts	ASTM D 4309 Sample Preparation, Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
EPA 3040A Sample Preparation, Dissolution, Oil, Grease, Wax	ASTM D 5765 Sample Preparation, Extraction of Total Petroleum Hydrocarbons (TPH) by Microwave Heating	ASTM D 5513 Sample Preparation, Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D 5198 Sample Preparation, Nitric Acid Digestion of Solid Waste	EPA 5030B Sample Preparation, Purge-and-Trap, Solid Wastes	EPA 3050B Sample Preparation, Sediments, Soils, Sludges, Acid Digestion
ASTM D 5369 Sample Preparation, Soxhlet Extraction, Solid Waste	EPA 1311 Sample Preparation, TCLP Extraction Procedure for Metals and Semi-volatiles	ASTM D 4698 Sample Preparation, Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
EPA 3005A Sample Preparation, Total Recoverable Metals	ASTM D 94 Saponification Number	TOL 5051 SARA, Saturates, Aromatics, Resins and Asphaltenes Analysis
TOL 5054 Scanning Electronic Microscope (SEM) Analysis	ASTM D 5182 Scuffing (Scoring) Load Capacity of Oils, FZG Method (12 Stage Standard Test)	ASTM D 2273 Sediment (Particulate Contamination) in Lubricating Oils (Solids Volume)
ASTM D 1698 Sediment and Solid Sludge in Service-Aged Insulating Oils	ASTM D 473 Sediment by Extraction	Exxon Sediment by Hot Filtration, Exxon Method
Shell Sediment by Hot Filtration, Shell Method	DuPont F3200 Sediment Content (Particulates/Solids)	ASTM D 4807 Sediment in Crude Oil by Membrane Filtration Test
ASTM D 3859 Selenium in Water	EPA 525 Semivolatile Organic Compounds	EPA 8270D Semivolatile Organic Compounds by GC-MS
EPA 8270C Semivolatile Organic Compounds by GC-MS Capillary Column	ASTM D 6553 Separability Characteristics of Way Lubricants	ASTM D 7061 Separability Number of Asphalt-Containing Heavy Fuel Oils
ASTM D 4124 Separation of Asphalt into Four Generic Fractions	ASTM D 3948 Separometer Index, Water Separation Characteristics, Micro (WSIM or MSEP)	ASTM D 6278 Shear Stability of Fluids, European Diesel Injector Apparatus
ASTM D 7342.a Shear Stability of Grease in Presence of Water Procedure A (100,000 stroke)	ASTM D 7342.b Shear Stability of Grease in Presence of Water Procedure B (roll stability)	ASTM D 2603 Shear Stability of Polymer-Containing Oils, Sonic
ASTM D 4749 Sieve Analysis of Coal and Designating Coal Size, per Sieve	ASTM D 293 Sieve Analysis of Coke, per sieve	ASTM D 5709 Sieve Analysis of Petroleum Coke, per sieve
ASTM D 4517 Silica in High-Purity Water by Flameless AA	ASTM E 887 Silica in RDF and RDF Ash	ASTM D 859 Silica in Water and Wastewater
ASTM D 4189 Silt Density Index of Water	ASTM D 3866 Silver in Water	ASTM D 2887.d Simulated Distillation, SimDis, High Temperature Range, 360 to 575°C, C10 to C50
ASTM D 2887.c Simulated Distillation, SimDis, Lower Temperature Range, 55 to 538°C, C5 to C44	ASTM D 4310 Sludging Tendencies of Inhibited Mineral Oils	ASTM D 1322 Smoke Point of Kerosene and Aviation Turbine Fuels
ASTM D 6071 Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy	ASTM D 36 Softening Point of Bitumen by Ring-and-Ball	ASTM D 852 Solidification Point of Benzene
ASTM D 6875 Solidification Point of Organic Chemicals	ASTM D 3944 Solidification Point of Petroleum Wax	ASTM D 3279 Solids, n-Heptane Insoluble, by 5 micron Millipore Filtration
ASTM D 2042 Solubility of Asphalt in Trichloroethylene	ASTM D 2780 Solubility of Fixed Gases in Liquids	ASTM D 4056 Solubility of Water in Hydrocarbon Lubricants
ASTM D 3827 Solubility, Estimation of Gases in Petroleum and Other Organic Liquids	ASTM D 3235 Solvent Extractables in Petroleum Waxes	ASTM D 5830 Solvents Analysis in Hazardous Waste Using Gas Chromatography
EPA 3550B Sonication Extraction, Solid Wastes SW-846	EPA 3540C Soxhlet Extraction, Sludges	EPA 9050 Specific Conductance
ASTM D 287.b Specific Gravity (Density, Relative Density) of Petroleum Products, See API Gravity	ASTM D 1070 Specific Gravity (Relative Density), Gaseous Fuel	ASTM D 5057 Specific Gravity and Bulk Density of Waste
ASTM D 2111 Specific Gravity and Density of Halogenated Organic Solvents	ASTM D 70 Specific Gravity and Density of Semi-Solid Bituminous Materials by Pycnometer Method	ASTM D 891.a Specific Gravity of Liquid Chemicals, Hydrometer Method
ASTM D 891.b Specific Gravity of Liquid Chemicals, Pycnometer Method	ASTM D 854 Specific Gravity of Soil Solids by Water Pycnometer	ASTM D 1429 Specific Gravity of Water and Brine
ASTM E 1269.a Specific Heat Capacity by Differential Scanning Calorimetry	ASTM D 2766 Specific Heat of Liquids and Solids	ASTM E 1269.b Specific Heat, Aircraft Turbine Lubricants by Differential Scanning Calorimeter (Replaces ASTM D 4816)
ASTM D 1169 Specific Resistance (Resistivity) of Electrical Insulating Liquids	ASTM D 3707 Stability of Water-in-Oil Emulsions, Oven Test	FTM 3430 Storage Stability and Compatibility
ASTM D 4625 Storage Stability of Distillate Fuel at 43°C (110°F)	ASTM D 5304 Storage Stability of Middle Distillate Fuel by Oxygen Overpressure	IP 139 Strong Acid Number
ASTM D 974.b Strong Acid Number, Color-Indicator Titration	ASTM D 5811 Strontium-90 in Water, by ICP-MS	TOL 5001 Sugar in Crankcase Oil
ASTM D 4130 Sulfate Ion in Brackish Water, Seawater, and Brines	ASTM D 516 Sulfate Ion in Water	ASTM D 4658 Sulfide Ion in Water by Ion Selective Electrode
EPA 9030B Sulfide, Reactive, in Solid Wastes, mg/L	ASTM D 4239 Sulfur Analysis in Coal and Coke Using High Temp Tube Furnace Combustion	ASTM D 4294 Sulfur by X-Ray Fluorescence Spectroscopy. LOD = 0.01 wt%
ASTM D 5623 Sulfur Compounds in Light Petroleum Liquids by GC and Sulfur Selective Detection	ASTM D 5504 Sulfur Compounds in Natural Gas and Gaseous Fuels by GC	ASTM D 6228 Sulfur Compounds in Natural Gas and Gaseous Fuels by GC/FPD
ASTM D 7220 Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry	ASTM D 6445 Sulfur in Gaseous by Energy Dispersive X-ray Fluorescence Spectrometry	ASTM D 6334 Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM D 2784 Sulfur in Liquefied Petroleum Gases	ASTM D 6920 Sulfur in Liquid Hydrocarbons by Oxidative Combustion and Electrochemical Detection	ASTM D 4045 Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM D 6667 Sulfur Total Volatile, in Gaseous Hydrocarbons and LPG	ASTM D 129 Sulfur, Bomb Method. LOD = 0.1 wt%	ASTM D 3120 Sulfur, by Microcoulometry, Light Hydrocarbons
ASTM D 2492 Sulfur, Forms of, in Coal	ASTM D 1552 Sulfur, High Temperature Method LOD = 0.06 wt%	ASTM D 1266 Sulfur, Lamp Method. LOD = 0.01 wt%
ASTM D 6428 Sulfur, Total, in Light Hydrocarbons, Oxidative Combustion Method	ASTM D 3177 Sulfur, Total, in the Analysis Sample of Coal and Coke	ASTM D 2622 Sulfur, X-Ray Spectrometry. LOD = 0.001 wt%
ASTM D 1331 Surface and Interfacial Tension of Solutions of Surface-Active Agents	ASTM D 3825 Surface Tension by Fast Bubble Technique	ASTM D 4206 Sustained Burning of Liquid Mixtures by the Seta-Flash Tester

T

ASTM D 412 Tensile Strength of Vulcanized Rubber and Thermoplastic Elastomers	ASTM E 1952 Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry	ASTM D 2717 Thermal Conductivity of Liquids (400°F maximum)
ASTM E 1225 Thermal Conductivity of Solids by Guarded-Comparative Longitudinal Heat-Flow Technique	ASTM D 1903 Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin and Askarels	ASTM D 3241 Thermal Oxidation Stability of Aviation Turbine Fuels, JFTOT Procedure
ASTM E 537 Thermal Stability of Chemicals by Differential Scanning Calorimetry	ASTM D 2070 Thermal Stability of Hydraulic Oils, 165 hours	ASTM D 6743 Thermal Stability of Organic Heat Transfer Fluids
ASTM D 6203 Thermal Stability of Way Lubricants	ASTM D 4735 Thiophene in Refined Benzene by Gas Chromatography	ASTM D 2509 Timken Extreme Pressure (EP) Properties of Lubricating Greases
IP 182 Total Acid Number	ASTM D 4839 Total and Organic Carbon in Water	ASTM D 4129 Total and Organic Carbon in Water by Hi-Temp Oxidation, Coulometric Detection
ASTM D 5291.b Total Carbon by CHN Analyzer	ASTM D 5176 Total Chemical Bound Nitrogen in Water by Pyrolysis	EPA 9253 Total Chlorides
ASTM D 4208 Total Chlorine in Coal by Oxygen Bomb Combustion, Ion Selective Electrode	ASTM D 6316 Total Combustible and Carbonate Carbon in Solid Residues from Coal and Coke	Std M 2540C Total Dissolved Solids, TDS
ASTM D 5987 Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction	ASTM D 6021 Total Hydrogen Sulfide in Residual Fuels	ASTM D 1157 Total Inhibitor Content (TBC) of Light Hydrocarbons
EPA 9056A Total Inorganic Chloride, by Ion Chromatography ( for Water Samples and Organic Samples that have been prepared using Method EPA 5050)	ASTM D 3590 Total Kjeldahl Nitrogen in Water	Std M 5310B Total Organic Carbon (TOC)
EPA 9060 Total Organic Carbon, (TOC)	ASTM D 5622 Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis	EPA 8015 Total Petroleum Hydrocarbon (TPH)
Texas 1006 Total Petroleum Hydrocarbon (TPH) Speciation	TEXAS 1005 Total Petroleum Hydrocarbons (TPH)	ASTM D 4870.a Total Sediment by Hot Filtration, Procedure A
ASTM D 4870.b Total Sediment by Hot Filtration, Procedure B	ASTM D 4870 Total Sediment in Residual Fuels	Std M 2540B Total Solids, TS
ASTM D 1072 Total Sulfur In Fuel Gases	ASTM D 4468 Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry	ASTM D 5453 Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by UV Fluorescence
ASTM D 3246 Total Sulfur in Petroleum Gas by Microcoulometry	Std M 2540D Total Suspended Solids, TSS	EPA 524.2 Total Trihalomethane
EPA 160.4 Total Volatile Solids	ASTM D 5194 Trace Chloride (Organic and Inorganic) in Liquid Aromatic Hydrocarbons, Titration Method	ASTM D 5839 Trace Element in Hazardous Waste Fuel, per element
EPA 200.7 CL Trace Elements by Inductively Coupled Plasma in Water and Waste (ICP-AES), per element	EPA 200.7 Trace Elements by Inductively Coupled Plasma, (ICP-AES), per element	ASTM D 3683.b Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM D 3683.a Trace Elements in Coal and Coke Ash by Atomic Absorption: Beryllium, Chromium, Copper, Manganese, Nickel, Lead, Vanadium, and Zinc, per element	ASTM D 6357 Trace Elements in Coal, Coke, and Combustion Residues by ICP-AES, ICP-MS, and GFAA	ASTM D 7111 Trace Elements in Middle Distillate Fuels by ICP-AES
ASTM C 1111 Trace Elements in Waste Streams, by ICP-AES, per element	ASTM D 4691 Trace Elements in Water by Flame Atomic Absorption Spectrophotometry, 14 elements. LOD = 0.5 ppm	ASTM D 3919.c Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry (GFAA). Includes: Sodium, Potassium, and Calcium. LOD = 0.01 ppm
ASTM D 3919.d Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry (GFAA). Includes: Sodium, Potassium, Calcium, Iron, and Copper. LOD = 0.01 ppm	ASTM D 3919.b Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry, (GFAA). Includes: Sodium and Potassium. LOD = 0.01 ppm	ASTM D 3919.a Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry, per Element
ASTM D 5673.a Trace Elements in Water by Inductively Coupled Plasma – Mass Spectrometry (ICP-MS), per element	ASTM D 4291 Trace Ethylene Glycol in Used Engine Oil	ASTM D 5673.b Trace Metals by ICP-MS Includes: Vanadium, Sodium, Potassium, Lithium, Lead, and Calcium. LOD = 0.01 ppm
UOP 389 Trace Metals in Oils by Wet Ashing and ICP-AES	ASTM D 5056 Trace Metals in Petroleum Coke by Atomic Absorption, per element	ASTM D 6376 Trace Metals in Petroleum Coke by Wavelength Dispensive X-ray Fluorescence Spectroscopy
ASTM D 6069 Trace Nitrogen in Aromatic Hydrocarbons, Chemiluminesence Detector	ASTM D 4419 Transition Temperature by Differential Scanning Calorimeter (DSC)	ASTM D 3418 Transition Temperature of Polymers by Differential Scanning Calorimeter (DSC)
ASTM D 2892 True Boiling Point and Distillation of Crude Petroleum (15 Theoretical Plates)	ASTM D 2889 True Vapor Pressure of Petroleum Distillate Fuels	ASTM D 1889 Turbidity of Water

U

ASTM D 3176 Ultimate Analysis (C, H, N, S, O) for Coke and Coal (See test package for coal and coke).	ASTM D 2008.a Ultraviolet Absorbance and Absorptivity, A-1 Oils	ASTM D 2008.b Ultraviolet Absorbance and Absorptivity, A-4 Oils
FDA 21-CFR 178 Ultraviolet Absorption Limits, Mineral Oils, FDA	ASTM D 2269 Ultraviolet Absorption Limits, Mineral Oils, USP	ASTM D 3240 Undissolved Water in Aviation Turbine Fuels
ASTM D 483 Unsulfonated Residue	ASTM C 1476 Urin for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry	40 CFR, 266.40 Used Oil Burned for Energy Recovery, Package

V

DIN 51790 Part 2 Vanadium by X-Ray Spectrometry	ASTM D 3373 Vanadium in Water	TOL 7070 Vapor Density
EPA 25E Vapor Phase, Organic Concentration	ASTM D 2878 Vapor Pressure and Molecular Weight, of Lubricating Oils	ASTM D 6377 Vapor Pressure in Crude Oil, Expansion Method
ASTM D 4953 Vapor Pressure of Gasoline, Dry Method	ASTM D 1267 Vapor Pressure of Liquefied Petroleum (LP) Gases	ASTM E 1719 Vapor Pressure of Liquids by Ebulliometry
ASTM D 6897 Vapor Pressure of Liquified Petroleum Gases (LPG) by Expansion Method	ASTM D 5190 Vapor Pressure of Petroleum Products (Automatic Method)	ASTM D 5482 Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)
ASTM D 5191 Vapor Pressure of Petroleum Products, Mini Method	ASTM D 323 Vapor Pressure of Petroleum Products, Reid Method	ASTM D 6738 Vapor Pressure of Petroleum Products, Triple Expansion Method
ASTM E 1194 Vapor Pressure, Standard Test Method	ASTM D 2879 Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope	ASTM D 2532 Viscosity Change After Low Temperature Standing, Aircraft Turbine Lubricants
ASTM D 6080 Viscosity Characteristics of Hydraulic Fluids at Low Temperature	ASTM D 2270 Viscosity Index, Calculated From Kinematic Viscosity Tests at 40°C and 100°C	ASTM D 6895 Viscosity of Heavy Duty Diesel Drain Oils at 100°C
ASTM D 2196 Viscosity, Brookfield	ASTM D 2171 Viscosity, Capillary, of Asphalts at 140°F, Poise	ASTM D 7042 Viscosity, Dynamic, and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
API RP 13B.b Viscosity, Fann VG Meter, AV, PV, YP, Gel, at 150°F	API RP 13B.a Viscosity, Fann VG Meter, AV, PV, YP, Gel, at 75°F	ASTM D 445.b Viscosity, Kinematic, at 100°C, cSt
ASTM D 445.a Viscosity, Kinematic, at 40°C, cSt	ASTM D 445.c Viscosity, Kinematic, at any other Temperature	ASTM D 2170 Viscosity, Kinematic, of Asphalts at 275°F, cP
ASTM D 2983 Viscosity, Low Temperature, of Lubricants by Brookfield Viscometer	ASTM D 88 Viscosity, Saybolt Furol, at 122°F, SFS	ASTM D 2161.a Viscosity, Saybolt Universal, at 100°F, SUS
ASTM D 2161.b Viscosity, Saybolt Universal, at 210°F, SUS	ASTM D 2161.c Viscosity, Saybolt Universal, at other temperature, SUS	ASTM D 2501 Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 5133 Viscosity/Temperature Dependence, Low Temperature, Low Shear Rate, of Lubricating Oils Using a Temperature-Scanning Technique	ASTM D 1524 Visual Examination of Electrical Insulating Oils	ASTM D 6986 Visual Inspection of Aviation Fuels for Free Water, Particulates, and Other Contaminants
ASTM D 4176.b Visual Inspection, Procedure B	ASTM D 5325 Volatile Content of Water-Borne Aerosol Paints	EPA Method 24 Volatile Matter Content, at 110°C, Gravimetric
ASTM D 3175 Volatile Matter in the Analysis Sample of Coal and Coke	ASTM D 6 Volatile Matter, Loss on Heating of Oils and Asphaltic Compounds	ASTM D 5466 Volatile Organic Chemicals in Atmospheres (Canisters Sampling Methodology)
ASTM D 6053 Volatile Organic Compounds (VOC) of Electrical Insulating Varnishes	EPA 8260B.b Volatile Organic Compounds by GC-MS	EPA 8240B Volatile Organic Compounds in Solid Waste, GC-MS
EPA 8260B.a Volatile Organic Compounds, Purge-and-Trap, GC-MS	ASTM D 6417 Volatility of Engine Oils by Gas Chromatography	ASTM D 1837 Volatility of Liquefied Petroleum (LP) Gases
ASTM E 2008 Volatility Rate by Thermogravimetry	ASTM D 2715 Volatilization Rates of Lubricants in Vacuum

W

ASTM D 4007 Water and Sediment in Crude Oil, BS&W	ASTM D 2709 Water and Sediment in Distillate Fuels, BS&W	ASTM D 1796 Water and Sediment in Fuel Oils, BS&W
ASTM D 4006 Water by Distillation, Crude Oil	ASTM D 95 Water by Distillation, Petroleum Products	IEC 60814 Water Content
ASTM D 4959 Water Content (Moisture) of Soil by Direct Heating Method	ASTM D 1123 Water Content by Karl Fischer Method, Antifreeze	ASTM D 7375 Water Content by Karl Fischer Method, Aromatic Hydrocarbons and their Admixtures
ASTM D 4928 Water Content by Karl Fischer Method, Crude Oil	ASTM D 3401 Water Content by Karl Fischer Method, Halogenated Organic Solvents	ASTM D 5530 Water Content by Karl Fischer Method, Hazardous Waste Fuels
ASTM D 1533 Water Content by Karl Fischer Method, Insulating Liquids	ASTM D 809 Water Content by Karl Fischer Method, Liquid Naval Stores	ASTM D 6304 Water Content by Karl Fischer Method, Lubricating Oils and Additives
ASTM E 1064 Water Content by Karl Fischer Method, Organic Liquids	ASTM D 4017 Water Content by Karl Fischer Method, Paints and Paint Materials	ASTM D 1364 Water Content by Karl Fischer Method, Volatile Solvents
ASTM E 203 Water Content by Volumetric Karl Fischer Method	ASTM D 4377 Water in Crude Oils by Potentiometric Karl Fischer Titration	ASTM D 1722 Water Miscibility of Water-Soluble Solvents
ASTM D 1094 Water Reaction of Aviation Fuels	ASTM D 7261 Water Separation Characteristics of Diesel Fuels by Portable Separometer, DSEP Rating	ASTM D 7224 Water Separation Characteristics of Kerosene-type Aviation Turbine Fuels Containing Additives
ASTM D 4049 Water Spray Resistance of Lubricating Grease	ASTM D 6422 Water Tolerance	ASTM D 5454 Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D 4888 Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes	ASTM D 1264.a Water Washout Characteristics of Greases at 38°C (100°F)	ASTM D 1264.b Water Washout Characteristics of Greases at 80°C (175°F)
ASTM D 3117 Wax Appearance Point of Distillate Fuels	UOP 46 Wax Content in Oil (Paraffin Wax)	ASTM D 6595 Wear Metals and Contaminants in Lubricating Oils by Rotating Disc Electrode Atomic Emission Spectrometry, (RDE-AES)
ASTM D 2266 Wear Preventive Characteristics of Grease, Four-Ball Method	ASTM D 4172 Wear Preventive Characteristics of Lube Oil, Four-Ball Method	ASTM D 3704 Wear Preventive Properties of Lubricating Greases using the Falex Block on Ring Test
ASTM D 2670 Wear Properties of Fluid Lubricants, Falex Pin and Vee-Block Method